U.S. Naval Academy, Annapolis, MD, USA
COMSOL is finite element modeling software capable of solving partial differential equations. This capability allows for the modeling of boundary value problems, which is necessary to the study of light and the properties of light propagation. For this study, we are modeling Fraunhofer diffraction of light using a solution of the Helmholtz equation with boundary values appropriate for ...
Characterization of an AlGaN/GaN Electrostatically Actuated Cantilever Using the Finite Element Method
N. DeRoller, M. Qazi, J. Liu, and G. Koley
University of South Carolina, Columbia, SC, USA
AlGaN/GaN heterostructures are unique because the 2DEG at the interface is created by the difference in polarization properties of the AlGaN and the GaN layers; not due to intentional doping. In this work, a 3D model of an electrostatically actuated micro cantilever has been developed using COMSOL for characterization using the finite element method (FEM). The microcantilever has AlGaN/GaN HFET ...
J.S. Crompton, L.T. Gritter, S. Yushanov, K.C. Koppenhoefer, and D. Magyari
AltaSim Technologies, LLC, Columbus, OH, USA
Golden Acoustics, Detroit, MI, USA
The preferred acoustic response of recording studios, auditoriums and conference halls is to have an even energy response over the entire room and throughout full audio spectrum. This can be accomplished by using acoustic panels with complex surface structures that scatter acoustic waves and diffuse sound level variability over the room volume or through the use of sound absorbing materials to ...
D. Groulx, and W. Ogoh
Dalhousie University, Halifax, NS, Canada
A 1D phase change problem, known as Stefan’s problem, for which analytical solutions are available, is solved as a 2D problem using COMSOL Multiphysics. The PCM medium is semi-infinite, initially solid at its melting temperature Tm, and at t = 0, the wall temperature is raised to Tw > Tm, prompting the PCM to start melting, from pure conduction, in a linear fashion starting at x = 0. The ...
A. Traidia, and F. Roger
AREVA NP, Technical Center, Saint Marcel, France
ENSTA Paristech, Paris, France
Using COMSOL Multiphysics, a finite element model is introduced in this paper to describe the couplings between the welding arc and the weld pool dynamic in pulsed gas tungsten arc welding. The cathode, arc-plasma and melting anode regions are taken into account. The unified time-dependent model describes the heat transfer, fluid flow and electromagnetic fields in the three regions. The ...
R.K. Kapania, R.C. Singh, and C. Sultan
Virginia Polytechnic Institute and State University, Blacksburg, VA, USA
This paper presents an ongoing effort, motivated by developing self-contained sensors for structural health monitoring of inflatable structures, to model the process of extracting useable electrical power from the mechanical vibrations of thin, prestressed membrane structures. Energy harvesting from mechanical vibrations of these structures may provide enough power to operate both the sensors as ...
E. Abdel-Rahman, M. Pallapa, M.A.S. Aly, L. Wong, A.I.H. Chen, K.W. Wong, and J.T. Yeow
University of Waterloo, Waterloo, ON, Canada
Micro-power generators (MPGs) harvest and store small amounts of ambient energy. The motivation of this paper is to compare the MPG modeling and simulation results obtained from COMSOL Multiphysics® with those obtained using three other approaches: CoventorWare®, ANSYS® and lumped element analysis. The MPG is composed of two identical micro-cantilever beams made of a piezoelectric ...
Z. Hasan, F. Darwish, and S. Al-Absi
Texas A&M University, College Station, TX, USA
Jordan University of Science and Technology, Irbid, Jordan
The main objective of the present work is to perform stress analysis on composite laminates under unaxial/biaxial loading to serve as a preliminary data for test verification. A detailed calculation based on the Classical Lamination Theory was performed for a laminate. The material used was carbon/epoxy applying a pure uniaxial load followed by a biaxial load. It was observed that the failure ...
University of Dayton, Dayton, OH, USA
Geothermal heat pumps use the earth as a heat source and sink via a ground heat exchanger (GHX) that consists of a network of buried heat exchange pipes, which can either be installed in vertical boreholes or in shallow horizontal trenches or excavations. The main goal in GHX design is to determine the minimum length of pipe needed to provide adequate fluid temperatures to heat pumps over their ...
Pryor Knowledge Systems Inc., Bloomfield Hills, MI, USA
This paper presents one approach to the modeling of an abrupt junction PIN photodiode light sensor using COMSOL Multiphysics software and the incorporated SPICE® capability. The current model is built using the capabilities of SPICE in COMSOL Multiphysics 4.0. This model demonstrates the use of SPICE and the AC/DC Module to build a conduction current, rather than an electrostatic, model. This ...