The Application Gallery features COMSOL Multiphysics tutorial and demo app files pertinent to the electrical, mechanical, fluid, and chemical disciplines. You can download ready-to-use tutorial models and demo apps with step-by-step instructions for how to create them yourself. The examples in the gallery serve as a great starting point for your own simulation work.
Use the Quick Search to find tutorials and apps relevant to your area of expertise. Log in or create a COMSOL Access account that is associated with a valid COMSOL license to download the MPH-files.
Concrete structures almost always contain reinforcements in the shape of steel bars ("rebars"). In COMSOL, individual rebars can be modeled by adding a Truss interface to the Solid interface used for the concrete. The solid mesh for the concrete and the rebar mesh can be independent, since the displacements are mapped from within the solids onto the rebar at a certain position.
The triaxial test is one of the most common tests used in laboratory soil testing. The soil sample is normally placed inside a rubber membrane and then compressed maintaining a radial pressure. In this model, a vertical displacement and a confinement pressure are applied on the sample and the static response and the collapse load for various confinement pressures are studied. The material is ...
A common verification model for geotechnical problems is of a shallow stratum layer of clay. In this model, a vertical load is applied to the clay strata top surface and the static response and collapse load are studied. The clay is modeled as an elastic-perfectly plastic material and the Mohr-Coulomb yield condition under plane strain conditions is used. The response is studied using an ...
This model provides an estimation of the behavior of the soil during a tunnel excavation. The surface settlement and the width of the plastic region around the tunnel are important parameters needed to predict the reinforcements to use during the excavation. Two study steps are used. The first computes the stress state of the soil before excavating the tunnel. The second computes the ...
Isotropic compression is a common exercise in soil testing. The modified Cam-Clay model describes the relation between the void ratio and the logarithm of the pressure. In this example, a soil sample is placed inside cylinder 10 cm in diameter and 10 cm in height. Due to the symmetry, the model is solved in 2D axial symmetry. A boundary load produces isotropic compression conditions.
This deep excavation model is inspired by a benchmark exercise specified by a working group of the German Society for Geotechnics. In this model, a 20 m excavation is modeled with ten steps by means of a parametric sweep. The interaction between the soil and the retaining wall is modeled with contact pairs, and struts are activated as the excavation reaches their depths.
This model shows how to set up a uniaxial compression test on a prestressed soil sample. Due to uniaxial compression and simple initial stress values, it is possible to determine the vertical yield stress analytically. The soil sample is modeled with soil plasticity and the Mohr-Coulomb criterion.
The concrete beam application allows the user to calculate the stress and deformation of his own concrete beam. Many inputs can be edited, like loads and boundary conditions, beam dimensions, distribution of reinforcement bars, and material properties of concrete and bars. Results show axial stress in concrete and beams, displacement and regions where plasticity occurs.